IEC 61034 Part 1 and 2 Three Cube Meter 3m3 Cable Smoke Density Tester
| Price: |
US $ 1/Set |
| Min Order: |
1/Set |
| Pay Type: |
L/C,T/T,Western Union,Paypal,Money Gram |
Product Specifications
| Prod Model: |
GD-61034 |
| Item Name: |
Three Cube Meter 3m3 Cable Smoke Density Tester |
| Function: |
Measurement of Smoke Density of Cables Burning Und |
| Chamber Internal Size: |
3m*3m*3m |
| Reference Standard: |
IEC61034-1 and IEC61034-2 |
| Frame Material: |
Stainless Steel SUS 301 |
| Power Supply: |
AC220V, 60Hz |
| Warranty Period: |
One Year |
| Test Mode: |
Instant Test |
| Test Region: |
Forming Cable |
| Certification: |
IEC |
Product Description
GD-61034 Cube Meter Cable Smoke Density Tester
Introduction:- 3 Meter Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034).
- This equipment is important to measure the smoke generation from the value of light source penetration through the smoke generated when the cable exposed to the specified standard fire source (ethanol 90±1%, methanol 4±1% and distilled water 6±1%) 1L±0.01L is burned.
Standards:- IEC 61034 - 1 & 2 - Measurement of Smoke density of cables burning under defined condition;
- BS 6853 - Code of practice for fire precautions in design and construction of passenger carrying trains;
Specifications:| 1 | Frame dimension | 3,000(W) × 3,000(D) × 3,000(H) |
| 2 | Frame material | Stainless Steel SUS 301 |
| 3 | Transparent sealed window | 100 × 100 mm |
| 4 | Foundation Fixed | Fixture unit |
| 5 | Light Source Power | DC12V, 100W |
| 6 | Light Source Focus Angle | 48˚ - 4.5˚ |
| 7 | Light Source Focus Intensity | 1:20 |
| 8 | Photo Cell Diameter | Ø45 mm |
| 9 | Photo Cell Cell Type | Selenium Cell |
| 10 | Exhaust Blower Fan Flow | 7 m3/min ~ 15 m3 /min |
| 11 | Exhaust Blower Size | 246(W) x 220(D) x 205(H) mm |
| 12 | Exhaust Blower Material | Stainless Steel (Inner Fan) |
| 13 | Exhaust Blower Power | AC220V, 60Hz, φ1, 210W |
| 14 | Exhaust Blower Flow Rate(max) | 8.0 m3 / min |
| 15 | Power Supply | AC220V, 60Hz |
| 16 | Torque | normal 300kg.f.cm , max 480 kf.f.cm |
| 17 | Rotation Angle | 0~90˚ ± 5˚ |
| 18 | Wind Velocity | ≤ 15m/sec |
| 19 | Control Rack Dimension | (W) 730 X (D) 650 X (H) 1,400 |
Features:- Chamber internal area is 3000mm±30mm and it's structured as Cubic Enclosure with appropriate fixed iron frame angle;
- It's configured with a door with test glass windows and in both faces of the opposite side there's a sealed transparent window (minimum 100mmX100mm) with a horizontal light measure system that allows light penetration;
- Designed to prevent direct sunlight exposure and severe weather change in Enclosure;
- Photocell and Light Source are located in the middle part of both windows of the wall surface in the opposite side to avoid physical contact;
- A lamp to provide regular light is installed;
- Two types of auto Filter system (Carrusel) are installed to automatically calibrate the transmissivity of light;
- The reduction of light by smoke is measured using Photocell;
- In order to verify accordingly the intensity of radiation to measure light change by self-emission, the equipment has been designed to fit various kind of filter in the Light Source;
- Support system to allow separate fitting of Light Source and Photocell in the outer wall;
- The Light Source is a halogen lamp with a clean crystal lamp and tungsten filament;
- Average power : 100W, Average voltage: DC12v, Average velocity of light : 2000 lm~3000 lm, and Average color temperature : 2800K~3200K;
- The Receptor Photocell is selenium or silicone type and has a spectrum reaction conform to Photopic Observer (similar to a human eye) of the International Commission on Illumination (CIE);
- A heating system is installed within the cube to swiftly match the standard temperature (25ºC±5ºC) in the initial test;
- We seek tester's safety and convenience through an Auto ignition system;
Test Result:- Flameout time(min);
- Time to max Ao;
- Min light transmittance (%);
- Add photo feature of carbonization area;
Our Service:
Presell Service:
After-sale Service:
Chongqing Gold Mechanical & Electrical Equipment Co., Ltd is a high-tech enterprise for researching, designing, developing and producing scientific and measuring instruments. With its continuous drawing of lessonas, unremitting innovation and borrowing of advanced technology from both at home and abroad, our company is now becoming a professional manufacture of oil tester, electric tester, fire testing equipment, and oil purifier.
Though highly acclaimed and favorably accepted by numerous customers and possessed of the right to import and export, to ensure the high quality of our products, we conduct our manufacturing in strict accordance with various standards of ISO, ASTM D, IP, GB etc. We have developed sales channels in many countries and regions such as Thailand, Philippine, Iran, Indonesia, Spain, Iceland, Chile, Regions of Southeast Asia, Middle East, Europe, North and South America etc, and have gained strong advantage and high reputation in international market.
We have persisted on the business idea of "Integrity Basis and Quality First" for the stable and constant development. We are making effort to develop together with customers from both domestic and abroad on the basis of reciprocity. Client, quality and service are our supreme target!
