Categories
Categories
| Price: | US $ 0.6-0.7/Piece |
|---|---|
| Min Order: | 30000/Piece |
| Pay Type: | T/T |
| Prod Model: | RD-W20780-A |
|---|---|
| Color: | Crystal Flint |
| OEM: | Yes |
| Weight: | 640g |
| Overflow Capacity: | 780ml |
| Standard Capacity: | 750ml |
| Height: | 275mm |
| Diameter: | 88mm |
| Bottle Decoration: | We Do According to Your Request |
| MOQ: | 10000PCS |
| Technology: | Machine-Made |
| Material: | Glass |
| Usage: | Wine |
| Sealing Type: | Cork |
| Item Number | RD-W20780-A |
| Weight | 640G |
| Overflow Capacity | 780ML |
| Height | 275MM |
| Max Diameter | 88MM |
Production Process of Glass Bottle
1,The Recipe. We use sand, limestone,soda ash and recycled glass in our glass recipe. Then the combined ingredients are sent to the furnace to melt.
2, Melting.Our furnace heats the batch mixture to about 1565 Degrees Celsius, or 2850 Degrees Fahrenheit, creating molten glass.
3,The"GOB". The molten glass is removed from the furnace, cooled to a uniform temperature and cut into "gobs" to form our glass containers.
4,Forming. We divert the gobs into forming machines and then mould them into beautiful,functional glass containers.
5,Conditioning. Formed containers pass through the lehr, a machine that reheats and gradually cools them to relieve any stresses and strengthen the glass.-
6,Inspection. Finally, we inspect our glass containers to make sure they meet our high quality standards. We recycle and remelt any containers that fail to meet the quality standards.
Production Equipment of Glass Bottle
Glass Bottle Decoration
We offer a variety of options that will put the finishing touch on your project-helping your brand make a statement that stands out on the store shelves. And by being the source for all your decorating projects or service,we can help you save the time and money that critical to your bottom line. We strive to provide you with the most distinctive and cost-effective decorating solutions.
Closures for Glass Bottle
We offer a variety of options that will put the finishing touch on your project-helping your brand make a statement that stands out on the store shelves. And by being the source for all your decorating projects or service,we can help you save the time and money that critical to your bottom line. We strive to provide you with the most distinctive and cost-effective decorating solutions.
Packaging for Glass Bottle
Order Samples of Glass Bottle
If you would like to order samples, please tell us the item number and quantity.
Note: We require a minimum order of 2 bottles and a maximum quantity is 10.
Mix-And-Match is acceptable.
Custom Glass Bottles
A custom bottle design is one of the best ways of making your brand stand out among the countless other products on the shelf. With a custom bottle, many characteristics of your brand can be conveyed at a glance-elegance, luxury, masculinity or femininity, complexity,regionality,tradition, quality and many others. It also allows you to add embossed text or patterns another way of really distinguishing your bottle.
At Raydea, we are especially suited to help you develop your own custom bottle to complement your branding and message. You will find our design fee is very competitive, or if you already have a drawings free of charge. And while you may think customization is an unaffordable luxury,our bespoke moulds are extremely affordable, with test moulds starting around $700 and full sets of production moulds from $1500-$3500.Comparable other vendors could charge twice as much for an equivalent set of moulds.
Don't be fooled by our low prices, however, we have experience manufacturing a broad range of shapes and sizes, and have succeeded in manufacturing bottles that were so complicated and challenging that other vendors didn't even dare try.
Distinguish your brand. Customize your bottle. And do it for a fraction of the cost.
Glass Bottle Moulding
BLOWING(Bottle or Jar)
BLANK MOULD---blank mold forms neck and initial shape
---parison mould where gob falls and neck is formed
---has number of sections
---finish section
---cavity section (made in two halves to allow parison removal)
---a guide or funnel for inserting gob
---a seal for gob opening once gob is settled in mold
---blowing tubes through the gob and neck openings
BLOW MOULD-blow mold produce the final shape
Two Types of Processes
The Safety Tips for Glassware
>>>Never place hot glassware on wet or cold surfaces,including countertops and sinks.
>>>Never add liquids to a hot glassware.
>>>Clear with plastic or nylon non-scratch pads or cleansers intended for glassware.
>>>Never place on stovetop or under broiler.
FAQ
1,Q: Are you factory or trading company?
A: We are trading company, having ten years experiences in suppling all kinds of glassware. So far, there are more than 40 stable factories cooperate with us for nearly ten years. So we can get lower price than you directly get from the factories. Most important, we provide one-stop service and having very good after-sales service that most factories can never do.
2,Q: What service can you provide?
A:We provide one-stop service from bottle design to shipping the products to your warehouse.
3, Q: How do you control the quality?
A: We have our own professional QC team. In order to provide our customer satisfactory products, our QC will on spot in each mass production. Our QC are not only familiar with the quality, but also well know about the technologies. So if there are any problems, we can deal with them immediately.
4,Q:What is Glass?
A:Supercooled liquid. Liquid which is cooled to a stage where its viscosity is so great that the molecules do not move freely enough to from crystals.
5,Q:What is glass made of?
A:Sand---70%, Soda Ash---15%, Limestone---10%
6,Q:What is cullet?
A:Cullet is recycled glass(from plant and post consumer) used at levels as high as 80% when available. It is needed and added to enhance the melting rate and it significantly reduces energy required for glass production.
7,Q:How many kinds of surface coatings?
A:There are two types of surface coatings. They are hot-end coating and cold-end coatings. Hot-end coating applied at the entrance to the annealing lehr to strength the glass surface. Cold-end coating depending on the filling process and end use. Typical cold-end coatings are oleic acid, monostearates, waxes, silicones, polyethylenes. The purpose of these two coatings are to reduce the coefficient of friction.
8,Q:How to calculate the tolerance of glass?
A:Tolerances as per glass packaging institute.
Capacity: 1% for large bottles and up to 15% for small bottles
Weight: generally 5%
Height: 0.5% to 0.8 overall height
Diameter: 1.5% for 200mm & 3% for 25mm
