Clear Epoxy Resin and Hardener for Crystal Epoxy 3D Floor Coating
| Price: |
US $ 8-9kgs |
| Min Order: |
20kgs |
| Pay Type: |
L/C,T/T,D/P,Western Union,Paypal |
Product Specifications
| Prod Model: |
113AB-1 |
| Mixing Ratio: |
3:1 |
| Curing Time: |
6hours |
| OEM: |
Available |
| Lead Time: |
3days |
| Bonding Function: |
Structural Adhesive |
| Application: |
Construction |
| Material: |
Epoxy |
| Classification: |
Room Curing |
| Main Agent Composition: |
Thermosetting Resin |
| Characteristic: |
Waterproof |
| Promoter Composition: |
Curing Agent |
| Composition: |
Organic Material |
| Color: |
Clear |
| Morphology: |
Liquid |
Product Description
Epoxy Resin 113AB-1FeatureEpoxy resin 113AB-1 can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, it can be cured faster at high temperature. .. Application312AB-8 can be widely used for high quality LED channel letter, photo frame, drops of glue, signs, cards, crafts, lamp potting and mold filling, etc.. Properties before Hardening| Part | 113A-1 | 113B-1 |
| Color | Transparent | Transparent |
| Specific gravity | 1.15 | 0.96 |
| Viscosity (25ºC) | 2000-4000CPS | 100 MAXCPS |
| Mixing ratio | A: B = 100:33(weight ratio) |
| Hardening conditions | 25 ºC×8H to 10H or 55ºC×1.5H (2 g) |
| Usable time | 25ºC×40min (100g) |
Operation 1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing. Properties after Hardening| Hardness, shore D | <85 |
| Withstand voltage, KV/mm | 22 |
| Flexural strength, Kg/mm2 | 28 |
| Volume resistivity, Ohm3 | 1x1015 |
| Surface resistance, Ohmm2 | 5X1015 |
| Thermal conductivity, W/M.K | 1.36 |
| Induced electric loss, 1KHZ | 0.42 |
| Withstand high temperature, ºC | 80 |
| Moisture absorption, % | <0.15 |
| Compressive strength, Kg/ mm2 | 8.4 |
Caution1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use. 2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.4, Keep away from children.5, Please take a trial before application to avoid usage mistake. Storage And Shelf Life1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment. 2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Shenzhen Jinhua Electronic Materials Co., Ltd engaged in epoxy resin adhesive and the second-processing of hardener agent since 2009, and now we are one of the most professional and competitive epoxy resin glue suppliers in China. Jinhua is professional in development, production and sale of epoxy resin AB glue with the factory area of 2000 square meter. All the equipments in Jinhua are comply to advanced international technology and standard, refer to the excellent formula in domestic and from abroad, and with the high property raw material imported from America, Japan and Germany, every step of the production are with strict test, all of our products have passed RoHS and REACH, make Jinhua to be the leading supplier in this field in China gained high reputation from our customers during the past years.
Jinhua mainly produce epoxy resin AB glue, crystal glue, potting glue, solar panel AB glue, decroation glue, surfboard coating glue, polishable glue and special adhesive, etc. With a very large range of applicaiton including crafts, decoration, fashion jewelry, sticker, promotional gifts, carbon fiber products coating, hard material adhesive, LED channel letters, LED strips potting, name plate, sign boards, solor panel, electronic potting, power encapsulation, molding filling and so on.
With the belief of "honest, harmony, creative, precisencess" and abundant experience, Jinhua people will always offer best solution to worldwide customers. With the principle of Service first, customer formost, we will be your most valuable and faithful cooperater.
We are looking forward to a mutual beneficial cooperation with the friends all over the world.
Welcome to Jinhua!
