Product Specifications
Prod Model: |
STM-M12 |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Operating Method: |
Maunal Press |
Voltage: |
220V |
Power: |
7000W |
Usage: |
T-Shirts(Flatbed) Heat Printing |
Printing Size: |
80*100cm |
Other Sizes Available: |
40X40cm, 40X50cm, 40X60cm etc |
Type: |
Ink Jet |
Plate: |
Lithography Printing |
Structure: |
Platen Press |
Color & Page: |
Multi-Colour Printing Press |
Printing Speed: |
7.5CPI |
Product Description
This heat press enables you to print many flat sublimation blanks, such as t-shirt, mouse pad, metal, mobile phone case, rock slate, slipper, bag, cushion etc.
Also it is one of our best seller.
Specification
Item No. | STM-M12 |
Printing size | 15x15, 38x38, 40x50, 50x70, 60x80, 80x100 cm and other customized size |
Voltage | 110V / 60Hz, 220V /50Hz |
Power | 1500, 2200, 2500, 3500, 4500, 9000 w |
Temperature range | 0-399 ºC |
Time range | 0-999 s |
G.W. | 18, 25, 30, 60, 80, 120 kg |
Packing dimension | 52x30x36, 72x44x39, 78x68x46, 84x80x66, 90x105x75, 105x120x80cm |
Packing | Strong carton box with foam inside |
Includes | 1 sheet silicone pad |
Product Display![Ce Approved T-Shirt Flat Heat Transfer Sublimation Heat Press Machine](/proimages/44f3j00CEeQRTDzTLpS/manual-flatbed-heat-press-transfer-machine-for-sublimation.jpg)
![Ce Approved T-Shirt Flat Heat Transfer Sublimation Heat Press Machine](/proimages/44f3j00BaeTRGIZvHuj/manual-flatbed-heat-press-transfer-machine-for-sublimation.jpg)
![Ce Approved T-Shirt Flat Heat Transfer Sublimation Heat Press Machine](/proimages/44f3j00MteQGzPdJDgs/manual-flatbed-heat-press-transfer-machine-for-sublimation.jpg)
![Ce Approved T-Shirt Flat Heat Transfer Sublimation Heat Press Machine](/proimages/44f3j00vaeQGLIJaPzZ/manual-flatbed-heat-press-transfer-machine-for-sublimation.jpg)
Feature:
1. Digital time and temperature controllers.
2. Aluminium heating plate, heating uniformity on the surface
3. Teflon coated on the heat plate, convenient and attractive appearance
4. Signal indicator when transfer press over
5. The pressure can be adjusted easily.
6. The silicon pad can endure maximum 350 degree without any distortion
Warranty:
You can rest assured that we will offer good after-sale service :
The machine enjoys one year warranty, life-long on-line technical support.
We provide free parts when problems occur within one year, not including shipping cost.
we also offer good quality: all the machine of our factory have been approved by CE.
Please note:
1. You should switch off the power when you don't use it. Don't heat nothing for a long time.
2. Avoid touching the heat press plate when you operating in case be injured.
3. If you feel the pressure is too much and it is hard to be pressed, or the pressure is not enough and it is too easy to be pressed, please adjust the pressure adjusting knob, decrease / increase the shrink of the spring. The intensity of the machine will be injured if the pressure is too much.
4. A successful print requires right time, temperature and pressure, the thickness of the fabric, even the type of printing paper, all will affect the performance of printing. Any kind of sublimation paper need be tested before mass production.
5. Keep children away from the machine even when the machine is left unused.
Operation Procedure
1. Check the voltage before using it. Then turn on the power supply!
2. Plug in, turn on the power switch of machine, the power indicator lightened.
3. Set the thermostat to the temperature needed, set the timer to the needed.
4. Place the clothes to the main plate, cover the printing paper (please note the right surface of the paper). Press the handle down until reach terminal.
5.When the time come down to over, the buzzer alarms, pull the handle back.
6.If it is cold-ripping of the transfer paper, please use blackboard wiper to rub against the whole transfer paper, wait for 5-10 seconds, then rip off the transfer paper. If it is the hot-ripping of the transfer paper, you can rip off the paper immediately.
About Us:Established in 2009, Suntek Print Co., Ltd. is a high-tech enterprise integrated in R&D, manufacture and trade on various transfer printing machines & consumables.
Our products are mainly as follows:
1. Heat press machines
3D sublimation vacuum machine, roller sublimation machines, heat press for t-shirt, mug, plate, cap etc.
2. Transfer consumables
sublimation paper, heat transfer paper, water decal paper, sublimation ink, sublimation blanks etc.
3. Sublimation blanks
such as mugs, mobile phone cases, plates, sublimation stone, and sublimation crystals and so on.
These products are widely used in fabric printing, digital printing and DIY gifts of t-shirts, mugs, phone cases, plates, crystals and so on.
We always keep developing high-quality competitive new products which has enjoyed a good reputation among our customers worldwide.
Welcome all types of companies and personal fans to contact us with your requirements. We also receive domestic and foreign OEM orders.![Ce Approved T-Shirt Flat Heat Transfer Sublimation Heat Press Machine](/proimages/44f3j00CtMaUqLBJDrs/manual-flatbed-heat-press-transfer-machine-for-sublimation.jpg)
Established in 2009, Suntek Print Company Limited (ST-PRINT) is a high-tech enterprise integrated in R&D, manufacture and trade on various printing equipments&consumables. We provide various printing equipment, hea transfer machines, consumable products, badge machines & badge accessories, digital
Electronics, garment processing products, silk screen printing and metal accessories as well as others.
Our ST-PRINT products are mainly as follows:
1. Heat transfer/press machines: Sublimation transfer machines, roller
Sublimation transfer machines, pneumatic heat press, shaking head heat press, high pressure heat press, t-shirt flat press, mug heat press, plate heat press, cap heat press, etc.
2. Transfer consumables: Sublimation paper, dark/light color cotton heat
Transfer paper, water transfer decal paper, sublimation ink, etc.
3. Badge/button making machines and badge/button accessories, etc.
4. Other kinds of printing equipment and consumable products.
With "Honesty, High-quality, Enthusiastic services and win-win result" as our motto, We always keep developing new products and providing you with the most competitive products. With high quality and competitive price, our products enjoy good reputation among our customers. Meanwhile, our company is located in Shenzhen, which enjoys convenient transportation and ensures prompt delivery. We welcome all types of companies, traders, digital photo studios, fashion stores, and personal fans to contact us with your requirements. We receive OEM orders from at home and abroad.